Skip to content
Online Training Course On Carbon Fibre Composite Materials
Theoretical Classes
0 – Introduction to the Carbon Fibre Training Course Lección de ejemplo
1 – What is a Composite?
2 – Thermoset Matrices and Resins
2.1 – Thermoset Matrices and Resins
2.2 – Types of Matrix Systems
2.3 – Properties of Crestapol 1260 and 1261
2.4 – Success Stories of Crestapol 1260 and 1261
3 – Reinforcement Fibres – Fundamental Principles
4 – Carbon Fibre
4.1 – Carbon Fibre – Introduction
4.2 – Properties of Carbon Fibre
4.3 – Carbon Fibre Properties II – Anisotropy
4.4 – Characteristics and Applications of Different Carbon Fibre Types
4.5 – Disadvantages of Carbon Fibre
5 – Physical Properties of Materials
6 – Other Types of Fibre
6.1 – Other Types of Fibre – Introduction
6.2 – Other Types of Fibre – Glass Fibre
6.3 – Other Types of Fibre – Basalt Fibre
6.4 – Other Types of Fibre – Aramid Fibre
6.5 – Other Types of Fibre – UHMWPE
6.6 – Other Types of Fibre – PBO Fibre
6.7 – Other Types of Fibre – Polypropylene Fibre (Innegra)
6.8 – Other Types of Fibre – Properties
6.9 – Other Types of Fibre – Commercial Forms
7 – Prepregs
7.1 – What are Prepregs?
7.2 – Prepreg Nomenclature
7.3 – Prepreg Processing
7.4 – Prepreg Processing II – Applications of Prepregs
7.5 – Typical Failures in the Use of Prepregs
7.6 – Typical Failures in the Use of Prepregs II – Visual Identification
8 – Moulds
8.1 – Moulds – Manufacture of Prepreg Tooling
8.2 – Moulds – Vacuum Bagging
8.3 – Moulds – Oven Curing
8.4 – Moulds – Common Errors
8.5 – Moulds – Reinforcement Structures
8.6 – Moulds – Epoxy Tooling Manufacture
8.7 – Moulds – Pros and Cons of Epoxy Tooling
9 – Release Agent Systems
10 – Sandwich Structures
10.1 – Construction of Sandwich Structures
10.2 – Types of Sandwich Cores – Balsa, Cork, PVC, SAN
10.3 – Types of Sandwich Cores – PET, PMI, PPSU, PEI, PU
10.4 – Types of Sandwich Cores – Honeycomb, Syntactic, Nonwovens
10.5 – Sandwich Structures – Final Conclusions
11 – Adhesives
11.1 – Structural Adhesives for Composites – Introduction
11.2 – Epoxy Adhesives
11.3 – Methacrylate Adhesives
11.4 – Methacrylate Adhesives II
11.5 – Typical Applications of Crestabond
12 – Safety Guidelines & Final Course Conclusions
12.1 – Health and Safety Guidelines
12.2 – Final Course Conclusions
PRACTICAL SESSIONS
1 – Release Agent Systems for Composite Materials
1.1 – Review of Different Release Agent Systems for Composite Materials
1.2 – Mikon 227MC Semi-Permanent Release Agent
2 – Manufacture of a Rotor Blade for an Underwater Power Generator
2.1 – Manufacture of a Carbon Fibre Rotor Blade for an Underwater Power Generator
2.2 – Bonding of Carbon Fibre Shell Halves Using Methacrylate Adhesive
2.3 – Epoxy Foam Injection and Demoulding of the Underwater Generator Blade
2.4 – Repeat Manufacture of a Carbon Fibre Rotor Blade for an Underwater Power Generator
3 – Manufacture of a Sandwich Carbon Fibre Part Using Structural Prepregs (Decorative Panel) Lección de ejemplo
4 – Carbon Fibre Prepreg Composite Mould
5 – Manufacture of a Sports Car Front Panel by Resin Infusion Using Carbon Fibres and High Impact-Resistant Materials
6 – Manufacture of an Exposed Carbon Fibre Part Using Carbon Fibre Prepregs and Epoxy Resin
Practical Session 7 – Manufacture of an Exposed Carbon Fibre Guitar Case by the Resin Infusion Process
Practical Session 8 – Manufacture of a Carbon Tube Using Differential Impregnation (DC) and Syntactic Prepregs
9 – Manufacture of a Carbon Fibre Master Model Using Liquid Epoxy Resin by Hand Lay-Up and Vacuum Bagging
10 – Manufacture of a Carbon Fibre Mould Using Low-Shrinkage Polyester Resin (Low Profile)
Logo texto negro
Lección Anterior
Siguiente Lección

3 – Manufacture of a Sandwich Carbon Fibre Part Using Structural Prepregs (Decorative Panel)

Products used in this tutorial

Carbon Prepreg VTC401 C200T

See Product

Prepreg Roller

See Product

Airsweep Applicator for Prepregs

See Product

Carbon Prepreg VTC401 CBX400

See Product

Vacuopeel Absorption Mat

See Product

Solid Bleeder Film

See Product

Zetafelt Absorption Mat

See Product

Bleeder Film ELA20

See Product

TT 210 Y Sealing Tape

See Product

Tubular Vacuum Bag Film 50 microns

See Product

Vacuum Pump DO10VTL4M

See Product

Vacuum Valve 401C

See Product
Gestionar el consentimiento de las cookies
Esta web utiliza cookies propias y de terceros para su correcto funcionamiento y con fines analíticos. Al hacer clic en el Aceptar, usted acepta el uso de estas tecnologías y el tratamiento de sus datos para estos fines.  Más información y preferencias
Funcional Siempre activo
El almacenamiento o acceso técnico es estrictamente necesario para el propósito legítimo de permitir el uso de un servicio específico explícitamente solicitado por el abonado o usuario, o con el único propósito de llevar a cabo la transmisión de una comunicación a través de una red de comunicaciones electrónicas.
Preferencias
El almacenamiento o acceso técnico es necesario para la finalidad legítima de almacenar preferencias no solicitadas por el abonado o usuario.
Estadísticas
El almacenamiento o acceso técnico que es utilizado exclusivamente con fines estadísticos. El almacenamiento o acceso técnico que se utiliza exclusivamente con fines estadísticos anónimos. Sin un requerimiento, el cumplimiento voluntario por parte de tu Proveedor de servicios de Internet, o los registros adicionales de un tercero, la información almacenada o recuperada sólo para este propósito no se puede utilizar para identificarte.
Marketing
El almacenamiento o acceso técnico es necesario para crear perfiles de usuario para enviar publicidad, o para rastrear al usuario en una web o en varias web con fines de marketing similares.
  • Administrar opciones
  • Gestionar los servicios
  • Gestionar {vendor_count} proveedores
  • Leer más sobre estos propósitos
Ver preferencias
  • {title}
  • {title}
  • {title}

Consultar por WhatsApp